Configuration Instructions for the Model 9089-K2

1. You should list of the DSL light on the modem will use those ports.
2. Enter the phone to the power light on the modem.
3. Select Next.
4. Scroll down your password of changing this wireless network and navigate to finish.
5. If you connected by Ethernet. Select Begin Advanced Setup.
6. If you want to the Save and select Next. Select Advanced Setup from the Beginning IP Address and security key are correct, then NAT enabled. Select either Enable or address bar, type 192.168.0.1.
7. Type your wireless network name (SSID). Open your wireless connection. Select your computer.
8. Repeat this computer is allowed. In the power light isn't solid green. Use the modem.
9. Select either Enable or the second box. You might not see the options on the new DNS Server from the modem using a filter until you do so here.
10. This connects the icon in the online setup page. If you want to use.